Cutting Coolant Purification Equipment (oil skimmer)

The customer told us about the tramp oil and water problems he encountered and wanted to solve. The smell of cutting coolant permeating the environment and the deterioration of processing quality caused by dirty oil are all old problems that are commonly encountered at workshop. The customer said that although the company is not big, he has worked hard here all his life, and even if it is a small problem, he must solve it with a serious attitude. After the visit, we completed the installation efficiently, and immediately operated and used BEST-1 to show the customer, from impurity filtration, dirty oil separation to ozone disinfection, 20 minutes later, the appearance of the coolant of the tank was completely like a brand new coolant.

This time we are cooperating with a CNC machining workshop, and the processed parts are made of stainless steel. Before installing our BEST-1, we have noticed the deterioration of the cutting coolant. In addition to the emulsification and deterioration and the influence of the coolant concentration, the surface of the cutting coolant is also full of a layer of stinky skin-type dirty oil.

This time we are cooperating with a CNC machining workshop, and the processed parts are made of stainless steel. Before installing our BEST-1, we have noticed the deterioration of the cutting coolant. In addition to the emulsification and deterioration and the influence of the coolant concentration, the surface of the cutting coolant is also full of a layer of stinky skin-type dirty oil.

The rust inhibitor oil and way lube oil flow into coolant sumps, thickening the surface tramp which allows the anaerobic bacteria to propagate in multiples. Without correct coolant management, the contamination and emulsification of the oil will just speed up, leading to costly replacement and terrible disposal charge.

Connecting to a BEST-1 Cutting coolant purification equipment, your coolant tank will be automatically monitored and managed 24/7 from filtration, separation to Ozone sterilization.

Keeping expensive machine tools in the best condition is a challenging lesson. Among the criteria, the maintenance of the cutting coolant plays an important role. Cutting coolant will eventually become rancid along with excessive surface tramp oil. Without proper management, it will lead to a drop in tool quality, tear and wear, and shorter tool life. Also, when wastewater treatment is not handled properly, unwanted issues such as government fines and penalties would occur.

This client we visited was aware of the different coolant oil separators in the market. After studying, they decided to choose HC FENG BEST-1 cutting coolant purification equipment to help maintain the cutting coolant used in their machine tools. This model has functions of eliminating contamination, removing impurities, purifying foul odor and minimizing biological growth with an ozone ionic purifier. Now it’s become an easy task for them to tackle the coolant with zero labor and much less cost and time.

This is a lathe workshop, because the machine is not equipped with an oil-water separator; resulting in too much cutting oil and slide way oil mixed in the water tank; Oil is covering the cutting fluid, it will soon go bad and smelly, and must replace it every 3 months. They came to see our BEST-1 at TIMTOS in Taipei and found it very easy to use. It can prolong the service life of the cutting fluid. They are very satisfied with BEST-1.